[1]贾富强[],赵阳[]. 基于VC++串口通信软件的设计与实现[J].计算机技术与发展,2015,25(06):158-162.
　JIA Fu-qiang[],ZHAO Yang[]. Design and Implementation of Serial Communication Software Based on VC++[J].,2015,25(06):158-162.
点击复制

 基于VC++串口通信软件的设计与实现()
分享到：

《计算机技术与发展》[ISSN:1006-6977/CN:61-1281/TN]

卷:
25
期数:
2015年06期
页码:
158-162
栏目:
应用开发研究
出版日期:
2015-06-10

文章信息/Info

Title:
 Design and Implementation of Serial Communication Software Based on VC++
文章编号:
1673-629X（2015)06-0158-05
作者:
 贾富强[1]; 赵阳[2]
 1.兰州交通大学 光电技术与智能控制教育部重点实验室；2.中铁工程设计咨询集团有限公司济南设计院
Author(s):
 JIA Fu-qiang[1]; ZHAO Yang[2]
关键词:
 ; 串口通信; 道岔; 信号机; CSerial Port类; 多线程
Keywords:
 ; serial communication; turnout; signal; CSerialPort class; multi-threaded
分类号:
TP311.1
文献标志码:
A
摘要:
 由于在对有轨电车道岔和信号机驱动板的通信调试过程中，存在上位机未设计好或者故障等因素，从而造成对联调进度的影响。针对这种情况，设计一种基于VC++串口通信的有轨电车道岔和信号机驱动板通信测试软件，直接通过测试软件代替上位机对驱动板进行通信调试，以提高调试效率。测试结果表明，该测试软件能够替代上位机的通信功能，完成对驱动板的通信调试，很大程度上提高了整个系统的联调效率，并且证明该软件简单易用，稳定可靠。
Abstract:
 During the driver board communication debugging process of tram turnout and signal,there are factors effecting joint testing schedule,such as upper computer design unfinished or fault. For this case,a driver board of tram turnout and signal communication testing software based on VC++ serial communication is designed,which can substitute upper computer to debug the communication with driver board,improving debugging efficiency. The test results show that the software can achieve communication function of upper computer and complete the driver board communication debugging. It improves debugging efficiency of whole system,and has been proved that the software is easy and available,stable and reliable.

相似文献/References:

[1]马兆远 王勇 马志峰.基于AT89S52的智能报警系统的设计与实现[J].计算机技术与发展,2009,(12):181.
　MA Zhao-yuan,WANG Yong,MA Zhi-feng.Design and Implementation of a Household Alarming System Based on AT89S52[J].,2009,(06):181.
[2]谢世环 徐中伟 胡天一.车站列控中心测试平台——通信仿真子系统研究[J].计算机技术与发展,2008,(01):243.
　XIE Shi-huan,XU Zhong-wei,HU Tian-yi.Study on Testing Platform for Train Control Center——Simulation of Communication Sub - System[J].,2008,(06):243.
[3]凌有铸 徐晓光 潘伟.基于WinCE的嵌入式远程实时监控系统[J].计算机技术与发展,2007,(07):204.
　LING You-zhu,XU Xiao-guang,PAN Wei.Remote Testing and Control System Based on Embedded WinCE[J].,2007,(06):204.
[4]师于杰.高可用CompactPCI平台在串口通信上的应用[J].计算机技术与发展,2006,(04):203.
　SHI Yu-jie.Application of a Redundant System Slot CompactPCI HA Platform on Serial Port Communication[J].,2006,(06):203.
[5]贾瑞玉 赖大荣.车流量测量仪串口通信的设计与实现[J].计算机技术与发展,2006,(10):199.
　JIA Rui-yu,LAI Da-rong.Design and Implementation of Serial- port Communication in Traffic Volume Tester[J].,2006,(06):199.
[6]赵奇峰 闵涛 杨黔龙 田亚军.基于LabVIEW串口数据采集系统设计[J].计算机技术与发展,2011,(11):224.
　ZHAO Qi-feng,MIN Tao,YANG Qian-long,et al.Design of Serial Data Collection System Based on LabVIEW[J].,2011,(06):224.
[7]陈荔 张菁.基于串口自定义协议传输文件的设计[J].计算机技术与发展,2012,(02):45.
　CHEN Li,ZHANG Jing.Transmission Document Design Based on Serial Port Definition Agreement[J].,2012,(06):45.
[8]李招峰 刘建设 金华标.基于QT/E的串口通信故障及其解决方案[J].计算机技术与发展,2012,(06):254.
　LI Zhao-feng,LIU Jian-she,JIN Hua-biao.Serial Communication Failures and Their Solutions Based on QT/E[J].,2012,(06):254.
[9]唐原广,孙磊.SZF波浪浮标双通信数据接收回放系统[J].计算机技术与发展,2014,24(06):196.
　TANG Yuan-guang,SUN Lei.SZF Wave Buoy Receiving and Playback System of Double Communications[J].,2014,24(06):196.
[10]张志宏,吴庆波,邵立松,等.基于飞腾平台TOE协议栈的设计与实现[J].计算机技术与发展,2014,24(07):1.
　ZHANG Zhi-hong,WU Qing-bo,SHAO Li-song,et al. Design and Implementation of TCP/IP Offload Engine Protocol Stack Based on FT Platform[J].,2014,24(06):1.
[11]张海洋. 船载天线串口数据采集系统的设计与实现[J].计算机技术与发展,2016,26(01):150.
　ZHANG Hai-yang. Design and Implementation of Serial Data Acquisition System for Ship Antenna[J].,2016,26(06):150.
[12]孙卫喜. 单片机在C语言串口通信中的应用解析[J].计算机技术与发展,2016,26(07):160.
　SUN Wei-xi. Analysis of Application of Single Chip Microcomputer in Serial Port Communication of C Language[J].,2016,26(06):160.

更新日期/Last Update: 2015-08-05