[1]赵强,田泽,楼小强,等.CAN总线控制器IP核设计实现[J].计算机技术与发展,2013,(08):230-233.
　ZHAO Qiang,TIAN Ze,LOU Xiao-qiang,et al.Design and Implementation of CAN Bus Controller IP[J].,2013,(08):230-233.
点击复制

CAN总线控制器IP核设计实现()
分享到：

《计算机技术与发展》[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2013年08期
页码:
230-233
栏目:
应用开发研究
出版日期:
1900-01-01

文章信息/Info

Title:
Design and Implementation of CAN Bus Controller IP
文章编号:
1673-629X（2013）08-0230-04
作者:
赵强; 田泽; 楼小强; 马超
中国航空计算技术研究所
Author(s):
ZHAO Qiang; TIAN Ze; LOU Xiao-qiang; MA Chao
关键词:
CAN总线; CAN总线控制器; 逻辑设计与验证
Keywords:
CAN bus; CAN bus controller; logic design and verification
文献标志码:
A
摘要:
CAN总线是一种成熟的串行通信总线，它具有可靠性高、稳定性好、抗干扰能力强、通信速率高、维护成本低、实时性强、很好的开放性及数据兼容性等优点。CAN总线这些众多的优点使其广泛应用于工业自动化控制等领域。其应用的广泛性则进一步对CAN总线IP提出了需求。同时以IP实现的CAN总线控制器所具有的通用处理器访问接口，良好的可移植性等优点使其可以集成于各种嵌入式SoC设计中。文中从CAN总线的规范和特点出发，提出了CAN总线控制器IP核的特点并定义了其功能，采用Verilog语言设计实现了CAN总线控制器IP核的功能，最后通过仿真和FPGA原型验证，证明了设计实现的正确性。目前CAN总线控制器IP核已经应用于SOPC和SoC的嵌入式应用设计中
Abstract:
CAN Bus had been considered as a kind of mature serial communication bus because of its highly reliability,better stability, strong capacity of resisting disturbance,high communication rate,low costing of maintaining and also benefited in strong real-time,good opening data sharing and so on. Due to its wide application,the extended demands would be proposed either. The CAN bus controller could be implemented into various of embedded SoC system based on CAN bus controller IP's advantages in its general processor access interface,good transportability. Proposed the function and character of CAN bus controller IP core and achieved the function of CAN con-troller with help of Verilog language based on the features of CAN bus protocol. According to simulation and FPGA verification,the de-sign had been proved as correct at last. Nowadays,CAN bus controller IP core had been widely used in SOPC and SoC embedded design and implementation

相似文献/References:

[1]王瑞晓 贺占庄.CAN总线位定时和同步机制的设计与实现[J].计算机技术与发展,2010,(04):235.
　WANG Rui-xiao,HE Zhan-zhuang.Design and Implementation of CAN Bus Bit Timing and Synchronization[J].,2010,(08):235.
[2]何伟 魏书楷 赵昼辰 张晓华.一种离散制造生产线RFID接口控制器[J].计算机技术与发展,2010,(06):192.
　HE Wei,WEI Shu-kai,ZHAO Zhou-chen,et al.An RFID Interface Controller for Production Line of Discrete Manufacturing[J].,2010,(08):192.
[3]余涛 刘晓明 仲元宏.基于ARM7的CAN总线中继器的设计[J].计算机技术与发展,2009,(11):198.
　YU Tao,LIU Xiao-ming,ZHONG Yuan-hong.Design of CAN Repeater Based on ARM7[J].,2009,(08):198.
[4]江晋剑 钱萌.基于AT89C55和CAN总线的智能节点设计[J].计算机技术与发展,2008,(04):214.
　JIANG Jin-jian,QIAN Meng.Design of Intelligent Points System Based on AT89C55 and CAN Bus[J].,2008,(08):214.
[5]边志伟 王击 覃业梅.火灾报警与联动控制系统实验装置的设计[J].计算机技术与发展,2008,(09):173.
　BIAN Zhi-wei,WANG Ji,QIN Ye-mei.Design of Experimental Device of Alarm and Control Linkage for Fires[J].,2008,(08):173.
[6]刘维弋 金远平.基于CAN总线的通信系统的设计与实现[J].计算机技术与发展,2007,(12):207.
　LIU Wei-yi,JIN Yuan-ping.Design and Realization of Communication System Based on CAN Bus[J].,2007,(08):207.
[7]喻萌 雷宏杰 朱少华.基于TMS320LF2407与CAN总线通信的汇编实现[J].计算机技术与发展,2006,(08):137.
　YU Meng,LEI Hong-jie,ZHU Shao-hua.CAN Bus Communication Based on TMS320LF2407 Using Assembly Language[J].,2006,(08):137.
[8]王鸿磊 李传发 张雪松.基于AT89S52的CAN通信接口设计[J].计算机技术与发展,2006,(12):190.
　WANG Hong-lei,LI Chuan-fa,ZHANG Xue-song.Design of CAN Interface Based on AT89C52 Controller[J].,2006,(08):190.
[9]王姜博 李文新 慕德俊 雷志广.CAN节点通讯及处理的强度测试设计[J].计算机技术与发展,2011,(06):189.
　WANG Jiang-bo,LI Wen-xin,MU De-jun,et al.Design of Strength Test on Communication and Manipulation of CAN Nodes[J].,2011,(08):189.
[10]李大力.基于CAN总线通信中多协议转换器设计[J].计算机技术与发展,2011,(09):124.
　LI Da-li.Design of Multiprotocol Switch in CAN Bus Communication[J].,2011,(08):124.

更新日期/Last Update: 1900-01-01