[1]李宏 薛伟 闫铁 历建爱.基于三菱Q系列PLC自升式钻井平台控制系统[J].计算机技术与发展,2011,(11):211-214.
　LI Hong,XUE Wei,YAN Tie,et al.Control System of Jack-Up Drilling Platform Based on PLC of Sanling Q Series[J].,2011,(11):211-214.
点击复制

基于三菱Q系列PLC自升式钻井平台控制系统()
分享到：

《计算机技术与发展》[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2011年11期
页码:
211-214
栏目:
应用开发研究
出版日期:
1900-01-01

文章信息/Info

Title:
Control System of Jack-Up Drilling Platform Based on PLC of Sanling Q Series
文章编号:
1673-629X（2011）11-0211-04
作者:
李宏 薛伟 闫铁 历建爱
东北石油大学电气信息工程学院
Author(s):
LI Hong;  XUE Wei;  YAN Tie;  LI Jian-ai
Electrical Information Engineering Institute, Northeast Petroleum University
关键词:
PLC; 海洋钻井平台; 升降控制
Keywords:
PLC; marine drilling platform; lifting control
分类号:
TE951
文献标志码:
A
摘要:
海洋钻井平台是海洋油气勘探、开发的主要设备。但是目前，我国使用和制造的海上石油钻井平台中的控制系统都是采用国外产品且造价昂贵，并且控制系统中控制信号的输出和传感器信号的输入大多为模拟信号，未采用专门的运动控制模块，从而导致平台升降控制精度较低。为了解决这个问题，提出并且设计了一种基于三菱Q系列PLC的自升式石油钻井平台控制系统，采用卷扬机代替昂贵的齿轮带动平台升降，利用Q系列PLC和运动控制器共同控制伺服放大器来实现对伺服电机的控制，有效地提高了升降控制精度。经实际证明，本控制系统能够有效并且精确地实现平台的控制功能，相比现有的平台控制系统，节省了大量的经费开支
Abstract:
Marine drilling platform is the main equipment of marine hydrocarbon prospecting and developing. But at present, the control systems of the drilling platform usually use foreign products in our country, these are very expensive, and in the control system, the output of control signal and input of sensor signal is mostly analog signals, without using special motion control module,these cause platform control precision is low comparatively. In order to solve this problem,it puts forward a control system of jack-up drilling platform based on PLC of Sanling Q series and designs a new mechanica/model. It adopts hoist instead of expensive gear. PLC of Sanling Q series and motion controller common control servo amplifier to achieve servo motor control. These improve the lift control precision effectively. The actual proof is that the control system can effectively and accurately realize platform control functions. Compared with the existing control system, it has saved a great deal of funding

相似文献/References:

[1]李丰堂 谢明红.基于VC＋＋的PC与PLC的通信软件设计[J].计算机技术与发展,2008,(08):219.
　LI Feng-tang,XIE Ming-hong.Design of Serial Communication Software Between PC and PLC Based on VC ＋ ＋[J].,2008,(11):219.
[2]刘瑞婷 张南平 陈勇.S7-200系列PLC自由口模式下实时通信技术研究[J].计算机技术与发展,2006,(12):156.
　LIU Rui-ting,ZHANG Nan-ping,CHEN Yong.ResearCh of Real- Time Communication Between PC and Series S7- 200 PLC in Free - Mode[J].,2006,(11):156.
[3]宗平 张静静.基于四网融合的新型智能小区设计研究[J].计算机技术与发展,2012,(08):208.
　ZONG Ping,ZHANG Jing-jing.Design Scheme of Intelligent Residential District Based on Four Networks Integration[J].,2012,(11):208.
[4]张文晶,张方舟,马瑞民,等. 基于PLC的井控远程台实物仿真培训系统的设计[J].计算机技术与发展,2016,26(02):174.
　ZHANG Wen-jing,ZHANG Fang-zhou,MA Rui-min,et al. Design of a Training System for Long Range of Well Control Physical Simulation Based on PLC[J].,2016,26(11):174.
[5]韩子彬.选煤厂工控网络安全实验分析[J].计算机技术与发展,2022,32(S2):162.[doi:10. 3969 / j. issn. 1673-629X. 2022. S2. 029]
　HAN Zi-bin.Experimental Analysis of Industrial Control Network Security in Coal Preparation Plant[J].,2022,32(11):162.[doi:10. 3969 / j. issn. 1673-629X. 2022. S2. 029]

备注/Memo

备注/Memo:
黑龙江省教育科学技术研究项目（11551026）李宏（1969-），女，博士，研究方向为信息传输及处理；薛伟（1987-），女，硕士研究生，研究方向为信息传输及处理
更新日期/Last Update: 1900-01-01