[1]刘亚楠 郭三华 涂铮铮 罗斌.VC＋＋与Matlab混合编程及其在轮辋裂纹检测中的应用[J].计算机技术与发展,2007,(07):233-235.
　LIU Ya-nan,GUO San-hua,TU Zheng-zheng,et al.Mixed Programming of VC ＋＋ with Matlab and Its Application in Wheel Crack Detection System[J].,2007,(07):233-235.
点击复制

VC＋＋与Matlab混合编程及其在轮辋裂纹检测中的应用()
分享到：

《计算机技术与发展》[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2007年07期
页码:
233-235
栏目:
应用开发研究
出版日期:
1900-01-01

文章信息/Info

Title:
Mixed Programming of VC ＋＋ with Matlab and Its Application in Wheel Crack Detection System
文章编号:
1673-629X（2007）07-0233-03
作者:
刘亚楠 郭三华 涂铮铮 罗斌
安徽大学计算智能与信号处理教育部重点实验室
Author(s):
LIU Ya-nan;  GUO San-hua;  TU Zheng-zheng;  LUO Bin
Ministry of Education Key Lab. of Intelligent Computing and Signal Processing, Anhui University
关键词:
混合编程; 裂纹检测; Matlab引擎
Keywords:
mixed programming;  crack detection;  Matlab engine
分类号:
TP391.41
文献标志码:
A
摘要:
文中结合轮辋裂纹检测系统介绍了几种VC＋＋与Matlab混合编程的方式，并具体分析了它们在轮辋裂纹检测中的可行性，得出了在轮辋裂纹检测中可以采用Matlab引擎的结论。最后结合边缘检测、形态学运算、最优阈值分割等多种方法，采用Matlab引擎较好地实现了轮辋裂纹检测，取得了理想的效果。实验表明该方法在轮辋裂纹检测系统的开发中大大提高了编程效率
Abstract:
Introduces several mixed programming methods of VC ＋ ＋ and Matlab based on the wheel crack detection system, and concretely analyses the feasibility of them in wheel crack detection system, eliciting the conclusion of using Matlab engine in crack detection system. To realize the wheel crack detection system, use the method of Matlab engine combined with edge detection algorithrn, morphological operation,optimal threshold segmentation, etc,and get the perfect effect. The experiments indicate that the programming efficiency is improved in the development of the wheel crack detection system using the proposed method

相似文献/References:

[1]徐少平 李洋[] 江顺亮 熊宇虹 叶发茂.基于混合编程的真实感图形生成课件[J].计算机技术与发展,2010,(02):185.
　XU Shao-ping,LI Yang[],JIANG Shun-liang,et al.A Courseware for Realistic Rendering Based on Hybrid Programming[J].,2010,(07):185.
[2]张曌 严洪森 张平.基于B／S结构的知识化制造自重构子系统的实现[J].计算机技术与发展,2008,(01):25.
　ZHANG Zhao,YAN Hong-sen,ZHANG Ping.Realization of Self- Reconfiguration Subsystem for Knowledgeable Manufacturing Based on B/S Framework[J].,2008,(07):25.
[3]宋伟 宋玉.基于SMP集群系统的并行编程模式研究与分析[J].计算机技术与发展,2007,(02):164.
　SONG Wei,SONG Yu.Research and Analysis of Parallel Programming Model Based on SMP Cluster System[J].,2007,(07):164.
[4]王文东 李竹林 尚建人.汇编语言与C语言的混合程序设计技术[J].计算机技术与发展,2006,(08):18.
　WANG Wen-dong,LI Zhu-lin,SHANG Jian-ren.Design Technique of Mixed Programming Between Assembly Language and C Language[J].,2006,(07):18.
[5]孙张阳 施展.基于Matcom的VC＋＋与Matlab混合编程的实现[J].计算机技术与发展,2012,(07):64.
　SUN Zhang-yang,SHI Zhan.Implementation of Programming by Combining Matlab With VC＋＋ Based on Matcom[J].,2012,(07):64.
[6]鄢志丹 王伟亮 孙立东 PETER Zeppenfeld.IDL与LabVlEW混合编程的图像信息处理方法[J].计算机技术与发展,2012,(11):27.
　YAN Zhi-dan,WANG Wei-liang,SUN Li-dong,et al.Image Processing Method Based on Hybrid Programming of IDL and LabVIEW[J].,2012,(07):27.
[7]李春娥,李明.基于VB和MATLAB的医学图像处理系统设计[J].计算机技术与发展,2013,(11):239.
　LI Chun-e,LI Ming.Design of Medicine Image Processing System Based on VB and MATLAB[J].,2013,(07):239.
[8]曹利锋,邹树梁,唐德文.基于VC++与MATLAB的故障树分析系统[J].计算机技术与发展,2014,24(01):77.
　CAO Li-feng[],ZOU Shu-liang[],TANG De-wen[].Fault Tree Analysis System Based on VC++ and MATLAB[J].,2014,24(07):77.
[9]张超[],唐明辰[]. 3m浮标U盘数据处理系统[J].计算机技术与发展,2015,25(10):170.
　ZHANG Chao[],TANG Ming-chen[]. Processing System of 3-meter-buoy U Disk Data[J].,2015,25(07):170.

备注/Memo

备注/Memo:
刘亚楠（1984-），女，山东济宁人，硕士研究生，研究方向为数字图像处理；罗斌，教授，博士生导师，研究方向为数字图像处理与模式识别
更新日期/Last Update: 1900-01-01