[1]哈清华,姜瑞凯,刘逻.软件缺陷的生成因素分析[J].计算机技术与发展,2016,26(01):1-5.
　 Analysis of Forming Factors in Software Defect[J].,2016,26(01):1-5.
点击复制

软件缺陷的生成因素分析()
分享到：

《计算机技术与发展》[ISSN:1006-6977/CN:61-1281/TN]

卷:
26
期数:
2016年01期
页码:
1-5
栏目:
智能、算法、系统工程
出版日期:
2016-01-10

文章信息/Info

Title:
 Analysis of Forming Factors in Software Defect
文章编号:
1673-629X（2016)01-0001-05
作者:
 哈清华; 姜瑞凯; 刘逻
 中国科学院 长春光学精密机械与物理研究所
Author(s):
 HA Qing-hua，JIANG Rui-kai， LIU Luo
关键词:
 ; 软件缺陷; 生成因素; 软件规模; 软件复杂度; 多元线性回归
Keywords:
 ; software defect; forming factor; software size; software complexity; multiple linear regression
分类号:
TP31
文献标志码:
A
摘要:
 软件缺陷是软件质量评价的重要依据，需要全面而深入的研究与分析，而同时导致软件缺陷形成的因素却多种多样，难以确定软件缺陷的生成原因。因此，为了分析软件缺陷的生成原因以及发现缺陷的方法，文中研究了基于多元线性回归的线性拟合方法，从被测对象、开发与测试人员、测试强度等方面研究对软件缺陷的影响。首先对软件缺陷的生成因素进行分析，并选定5个因素作为分析变量，建立分析模型。之后通过数据分析获得了回归方程，并依据方程确定各因素对软件缺陷生成的影响程度。通过分析获得的各因素的 t 检验值可知，测试时间对软件缺陷的生成影响最大，而软件复杂度和开发人员经验也对软件缺陷的生成具有较大的影响。
Abstract:
 Software defects is an important basis for software quality evaluation,so it is necessary to thoroughly and deeply research on it. However the reasons rising software defects are too complicated to identify. In this paper,for analyzing the reasons for the generation of software defects and the methods of finding defects,based on linear fitting method of multiple linear regression,study the effects of soft-ware defects from the tested object,developers and testers,testing strength and so on. First,5 factors were selected to build analysis mod-el. Second,the regression equation was obtained by analyzing the data and the factors degree of influence on software defects generating were determined. Finally,by analyzing the t value,it is found that the strength of time is the most significant factors and the complexity of software and developers experience also have important influence in software defect generation.

相似文献/References:

[1]张志宏,吴庆波,邵立松,等.基于飞腾平台TOE协议栈的设计与实现[J].计算机技术与发展,2014,24(07):1.
　ZHANG Zhi-hong,WU Qing-bo,SHAO Li-song,et al. Design and Implementation of TCP/IP Offload Engine Protocol Stack Based on FT Platform[J].,2014,24(01):1.
[2]梁文快,李毅. 改进的基因表达算法对航班优化排序问题研究[J].计算机技术与发展,2014,24(07):5.
　LIANG Wen-kuai,LI Yi. Research on Optimization of Flight Scheduling Problem Based on Improved Gene Expression Algorithm[J].,2014,24(01):5.
[3]黄静,王枫,谢志新,等. EAST文档管理系统的设计与实现[J].计算机技术与发展,2014,24(07):13.
　HUANG Jing,WANG Feng,XIE Zhi-xin,et al. Design and Implementation of EAST Document Management System[J].,2014,24(01):13.
[4]侯善江[],张代远[][][]. 基于样条权函数神经网络P2P流量识别方法[J].计算机技术与发展,2014,24(07):21.
　HOU Shan-jiang[],ZHANG Dai-yuan[][][]. P2P Traffic Identification Based on Spline Weight Function Neural Network[J].,2014,24(01):21.
[5]李璨,耿国华,李康,等. 一种基于三维模型的文物碎片线图生成方法[J].计算机技术与发展,2014,24(07):25.
　LI Can,GENG Guo-hua,LI Kang,et al. A Method of Obtaining Cultural Debris’ s Line Chart Based on Three-dimensional Model[J].,2014,24(01):25.
[6]翁鹤,皮德常. 混沌RBF神经网络异常检测算法[J].计算机技术与发展,2014,24(07):29.
　WENG He,PI De-chang. Chaotic RBF Neural Network Anomaly Detection Algorithm[J].,2014,24(01):29.
[7]刘茜[],荆晓远[],李文倩[],等. 基于流形学习的正交稀疏保留投影[J].计算机技术与发展,2014,24(07):34.
　LIU Qian[],JING Xiao-yuan[,LI Wen-qian[],et al. Orthogonal Sparsity Preserving Projections Based on Manifold Learning[J].,2014,24(01):34.
[8]尚福华,李想,巩淼. 基于模糊框架-产生式知识表示及推理研究[J].计算机技术与发展,2014,24(07):38.
　SHANG Fu-hua,LI Xiang,GONG Miao. Research on Knowledge Representation and Inference Based on Fuzzy Framework-production[J].,2014,24(01):38.
[9]叶偲,李良福,肖樟树. 一种去除运动目标重影的图像镶嵌方法研究[J].计算机技术与发展,2014,24(07):43.
　YE Si,LI Liang-fu,XIAO Zhang-shu. Research of an Image Mosaic Method for Removing Ghost of Moving Targets[J].,2014,24(01):43.
[10]余松平[][],蔡志平[],吴建进[],等. GSM-R信令监测选择录音系统设计与实现[J].计算机技术与发展,2014,24(07):47.
　YU Song-ping[][],CAI Zhi-ping[] WU Jian-jin[],GU Feng-zhi[]. Design and Implementation of an Optional Voice Recording System Based on GSM-R Signaling Monitoring[J].,2014,24(01):47.
[11]梁天超[][],荆晓远[],姚永芳[],等. 基于加权RFE-Bayes方法的软件缺陷预测模型[J].计算机技术与发展,2015,25(10):131.
　LIANG Tian-chao[][],JING Xiao-yuan[],YAO Yong-fang[],et al. A Prediction Model for Software Defect Based on Weighted RFE-Bayes[J].,2015,25(01):131.

更新日期/Last Update: 2016-04-12