[1]王帅 齐晓慧.基于CATIA的涵道风扇无人机三维建模[J].计算机技术与发展,2011,(05):187-189.
　WANG Shuai,QI Xiao-hui.Three Dimensional Parametric Modeling of Ducted Fan UAV Based on CATIA[J].,2011,(05):187-189.
点击复制

基于CATIA的涵道风扇无人机三维建模()
分享到：

《计算机技术与发展》[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2011年05期
页码:
187-189
栏目:
应用开发研究
出版日期:
1900-01-01

文章信息/Info

Title:
Three Dimensional Parametric Modeling of Ducted Fan UAV Based on CATIA
文章编号:
1673-629X（2011）05-0187-03
作者:
王帅 齐晓慧
军械工程学院光学与电子工程系
Author(s):
WANG Shuai;  QI Xiao-hui
Department of Optical and Electrics Engineering, Ordnance Engineering College
关键词:
涵道风扇; 无人飞行器; 参数化建模; CATIA软件
Keywords:
ducted fan ;  unmanned aircraft vehicles;  parametric modeling ;  CATIA software
分类号:
TP39
文献标志码:
A
摘要:
为了更直观、更形象地对涵道风扇无人机进行动力学特性分析，清晰生动地反映出涵道风扇无人机的实体特性，使人们对涵道风扇无人机有一个具体直观的印象，在CATIA软件中建立了涵道风扇无人机的三维模型。使用了系统参数、用户参数和表格参数等方法，同时详细介绍了无人飞行器参数化建模的一般步骤。通过对CATIA的草图设计、装配设计及图像渲染等模块的使用，实现了涵道风扇无人机的三维建模，为以后的动力学、控制系统仿真打下了基础。因此，容易得出应用CATIA软件可以更好地对涵道风扇无人机进行三维建模的结论
Abstract:
In order to analyse the dynamics and reflect the physical charateristics of the ducted fan UAV intuitionistic, three dimensional modeling was builded based on CATIA so that people could have specific visual impression to the ducted fan UAV. Use the system parameter, consumer parameter and excel parameter and other methods. Meanwhile the usual parametric modeling approach of the UAV was introduced. Realized the whole design of the UAV by the sketche, assembly design and photo render on the CATIA. The research result can offer help for further simulation on the hydrodynamics and control system. So, come to a conclusion easily that three dimensional parametric modeling of ducted fan UAV was builded better in the CATIA

相似文献/References:

[1]孟魁杰 董莹 赵宗涛.一种基于数据挖掘的无人飞行器故障分析方法[J].计算机技术与发展,2010,(06):225.
　MENG Kui-jie,DONG Ying,ZHAO Zong-tao.A Fault Analysis Method Based on Data Mining for Unmanned Aerial Vehicle[J].,2010,(05):225.

备注/Memo

备注/Memo:
国防武器装备预研基金项目（9140A25070509JB3405）王帅（1986-），男，山东淄博人，硕士研究生，主要从事无人机建模与稳定机理研究
更新日期/Last Update: 1900-01-01